RF LED Controller Kit RT1 V1 For Single Color LED Light Strips

LED Controller Set Fetures Ultra-sensitive touch wheel： You can adjust brightness smoothly and precisely with just a swipe. Specifically, the RT1 remote provides a very responsive experience. Furthermore, this RF LED controller kit gives you full control over your lighting. Consequently, you can create the perfect atmosphere with minimal effort.Remote control with smart presets： The remote includes five quick brightness keys for your convenience. In addition, four scene memories make it easy to set your favorite lighting. Specifically, you can save and recall your settings instantly. Moreover, it includes a 30-second delay-off function. Therefore, this kit provides added comfort for your daily life.Flicker-free dimming: Enjoy smooth brightness transitions and on/off switching without any flickering, protecting your eyes and creating a comfortable ambiance. Can work with our single-color COB LED light strips. External Push Switch Compatible： First and foremost, you can connect a standard wall switch to this unit. Specifically, this allows you to turn lights on or off easily. Furthermore, you can adjust the brightness with a simple press. Consequently, it offers very flexible control options for any installation. In addition, this feature integrates perfectly with your existing home setup.Customizable Fade Time： Meanwhile, you can set the light on/off fade time up to 3 seconds. Therefore, you will enjoy seamless and elegant transitions. As a result, these smooth changes significantly enhance the mood of any room. In summary, this professional feature adds a touch of luxury to your lighting project. RF Dimming Single Color LED Controller Kit Parameters V1 LED Receiver’s Input and OutputInput voltage: 5-36VDCInput current: 8.5AOutput voltage: 5-36VDCOutput current: 1CH,8AOutput power: 40W/96W/192W/288W (5V/12V/24V/36V)Output type: Constant voltage RT1 LED Remote’s Input and OutputOutput signal: RF(2.4GHz)Working voltage: 3VDC(AAAx2)Working current: ＜5mAStandby current: ＜10μAStandby time: 1 yearsRemote distance: 30m(Barrier-free space) Dimming dataDimming level: 4096 levelsDimming range: 0 -100%Dimming curve: LogarithmicPWM Frequency: 2000Hz(default) Safety and EMCEMC standard: EN IEC 55015/EN IEC 61547, ETSI EN 301 489-1/-3Safety standard: EN 61347-1/-2, EN 62493Radio Equipment: ETSI EN 300 440Certification: CE, RoHS, FCC Warranty and ProtectionWarranty: 5 yearsProtection: Reverse Polarity, Over-heat, Over-load, Short circuit EnvironmentOperation temperature: Ta: -30°C ~ 55°C Case temperature(Max.): Tc: 85°C IP rating: IP20 Mechanical Structures and Installations RT1 Remote Key Function RF LED Controller Kit V1 RT1 Wiring Diagram Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the Match KeyTo Match:First, short-press the match key on the controller. Immediately, press the on/off key on your remote. Consequently, the pairing process will complete successfully.To Delete:Alternatively, press and hold the match key for 5s. As a result, this will delete all previous matches. Meanwhile, the light will blink 5 times. In summary, this indicates that all remotes are now deleted. Use Power RestartTo Match:First, switch off the power and then switch it on again. Next, repeat this power cycle one more time. Immediately, short-press the on/off key 3 times. Consequently, the light will blink 3 times. Therefore, your match is now successful.To Delete:In addition, you can use power restart to delete matches. First, repeat the same power cycle as before. Next, immediately short-press the on/off key 5 times. Consequently, the light will blink 5 times. Finally, this means all matched remotes were removed.